How To Back Up Configuration Data; How To Back Up Configuration Data To The Startup Compactflash (Cf) - Furuno VR-7000 Instruction Manual

Vdr maintenance viewer
Hide thumbs Also See for VR-7000:
Table of Contents

Advertisement

3.
HOW TO BACK UP
CONFIGURATION DATA
This chapter shows you how to back up configuration data to various storage media.
Configuration data can be opened with WordPad or any text editor other than
NotePad.
3.1
How to Back up Configuration Data to the
Startup CompactFlash (CF)
Back up data to the startup CF after setting the VDR. Configuration data is created on
the CF as a config.ini file. Writing is simultaneously done to the CF, Fixed DRU, Float
DRU, and Long Term Device.
Note: When the error shown below occurs during the downloading or uploading of
configuration data, check the connection of the DRU (Fixed, Float), Long Term Device
and CF, and then upload or download the configuration data again.
- [CONN] Download failed.
- [CONN] Could not upload config file.
If error re-occurs, re-install the VDR Maintenance Viewer.
How to backup data to the startup CF
1. Set up parameters on the tabs, referring to Chapter 2.
2. Click the [Maintenance] menu.
3. Select [VDR Config Management].
4. Click the [Upload] button.
5. A confirmation window appears; click the [OK] button to start uploading to the
VDR.
3-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents