Furuno VR-7000 Instruction Manual page 30

2. SOFTWARE CONFIGURATION
3. Click [Select Equipment] from the [Setting] window.
4. Click the connected device in the selected channel. The setting contents are
displayed in the [Information] and [Setting] windows.
5. If required, update the contents in the [Setting] window, referring to the
descriptions in this section.
6. Click the [Set] button.
Note: Be sure to click the [Set] button before moving to another channel.
7. Repeat steps 2-6 to set up other channels.
When using Config Manager with tabs:
1. From the [Maintenance] menu, click [VDR Config Management].
2. Click the [Upload] button to record to VDR memory.
3. Click the [Write] buttons to record to DRU (fixed or floating), Long Term Device,
and CF.
MIC test
Do the MIC test to check if the audio signal is clear and its level appropriate.
1. Click the [MIC TEST] button in the [Setting] window.
2. Click the [TEST] button in the [MIC Test] dialog box.
3. Click the [Close] button to close the dialog box.
2-14
Click
TEST
button