Furuno VR-7000 Instruction Manual page 20

2. SOFTWARE CONFIGURATION
Image interface settings
1. Click the [Image Interface] tab.
2. Click the [Select Equipment] button in the [Setting] window to show the
[Equipment Selection] dialog box.
3. Select a radar or ECDIS model.
For example, as in the illustration on the preceding page, select [Radar] > [Radar
Interface] > [Furuno] > [FAR-28x7] > [SXGA(60Hz)] and click the [OK] button. As
in the following illustration, FAR-28x7 appears in the [Input Source] field in the
[CH. No.] (for example, CH No.1) of the [Information] window. Detailed information
about the selected radar appears in the [Setting] window.
If your radar model is not in the list, enter the required information manually.
4. Check [Active] to make the radar or ECDIS active.
5. Enter the brand name of the radar or ECDIS in the [Brand] field.
2-4
FAR-28x7