Making Backup Copy Of Configuration Data; Copy To Compact Flash Card - Furuno VR-3000 Instruction Manual

4 Making backup copy of configuration data

For future reference, make a backup copy of the configuration data by following the
instruction below. The configuration data file is opened up in WordPad or other editor
(not Notepad).
4.1 Copy to boot compact flash card
After software configuration is complete, make a copy of the configuration data on to
the Compact Flash card in the DCU. If the configuration data in the DRU is accidentally
erased, the configuration data stored onto the compact flash card is automatically
transferred to the DRU at the next power on. The configuration data file created on the
compact flash card is config.ini.
To save the data on to the compact flash card;
1. Go to Configuration menu.
2. Press Handle CONFIG-file button. Handle CONFIGRATION-file window appears.
(Fig. 4.1)
3. Press CONFIGURATION to BOOTFLASH: Save button.
Fig. 4.1 Handle CONFIGURATION-file window
20