Configuring Ipv6 Bgp Community - HP MSR2000 series Configuration Manual

Step
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Create an EBGP peer group.
5. Configure the AS number for
the peer group.
6. Add an IPv6 peer into the
peer group.
Creating a mixed EBGP peer group
When creating a mixed EBGP peer group, you must create a peer and specify its AS number that is
different from AS numbers of other peers; however, you cannot specify AS number for the EBGP peer
group.
To create a mixed EBGP peer group:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Create an EBGP peer group.
5. Specify the AS number of an
IPv6 peer.
6. Add the IPv6 peer into the
peer group.

Configuring IPv6 BGP community

When configuring IPv6 BGP community, you must configure a routing policy to define the COMMUNITY
attribute, and apply the routing policy to route advertisement. For routing policy configuration, see
"Configuring routing
Advertising community attribute to an IPv6 peer or peer group
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
Command
bgp as-number
ipv6-family
group ipv6-group-name external
peer ipv6-group-name as-number
as-number
peer ipv6-address group
ipv6-group-name
Command
system-view
bgp as-number
ipv6-family
group ipv6-group-name external
peer ipv6-address as-number
as-number
peer ipv6-address group
ipv6-group-name
policies."
Command
system-view
bgp as-number
ipv6-family
341
Remarks
N/A
N/A
N/A
Not configured by default.
Not added by default.
Remarks
N/A
N/A
N/A
N/A
Not specified by default.
Not added by default.
Remarks
N/A
N/A
N/A