Configuring Bfd For Ipv6 Bgp; Displaying And Maintaining Ipv6 Bgp; Displaying Bgp - HP MSR2000 series Configuration Manual

Hide thumbs Also See for MSR2000 series:
Table of Contents

Advertisement

Configuring BFD for IPv6 BGP

IPv6 BGP maintains neighbor relationships based on the keepalive timer and holdtime timer, which are
set in seconds. IPv6 BGP defines that the holdtime interval must be at least three times the keepalive
interval. This mechanism makes the detection of a link failure rather slow and thus causes a large
quantity of packets to be dropped especially when the failed link is a high-speed link. You can enable
BFD to detect the link to a peer. BFD can quickly detect any link failure and thus reduce network
convergence time.
After a link failure occurs, BFD may detect the failure before the system performs GR and as a result, GR
will fail. Therefore, if GR capability is enabled for IPv6 BGP, use BFD with caution. For more information
about BFD, see High Availability Configuration Guide.
IMPORTANT:
Before configuring BFD for IPv6 BGP, you must enable BGP.
To enable BFD for a BGP peer:
Step
1.
Enter system view.
2.
Enable BGP and enter BGP
view.
3.
Enter IPv6 address family
view.
4.
Enable BFD for the specified
BGP peer.

Displaying and maintaining IPv6 BGP

Displaying BGP

Task
Display IPv6 BGP peer group
information.
Display IPv6 BGP advertised
routing information.
Display IPv6 BGP AS path
information.
Display IPv6 BGP peer or peer
group information.
Command
system-view
bgp as-number
ipv6-family
peer ipv6-address bfd
Command
display bgp ipv6 group [ ipv6-group-name ] [ | { begin
| exclude | include } regular-expression ]
display bgp ipv6 network [ | { begin | exclude |
include } regular-expression ]
display bgp ipv6 paths [ as-regular-expression | |
{ begin | exclude | include } regular-expression ]
display bgp ipv6 peer [ group-name log-info |
ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ] [ | { begin | exclude | include }
regular-expression ]
343
Remarks
N/A
Not enabled by default.
N/A
Not enabled for any BGP peer by
default.
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr3000 seriesMsr4000 series

Table of Contents