HP MSR2000 series Configuration Manual page 414

Step
3. Configure a network entity
title.
4. Redistribute remote site routes
advertised by the PE.
5. Return to system view.
6. Enter interface view.
7. Enable the IS-IS process on
the interface.
Configuring EBGP between MCE and VPN site
To use EBGP for exchanging routing information between an MCE and VPN sites, you must configure a
BGP peer for each VPN instance on the MCE, and redistribute the IGP routes of each VPN instance on
the VPN sites.
If EBGP is used for route exchange, you also can configure filtering policies to filter the received routes
and the routes to be advertised.
Configure the MCE:
1.
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance view.
4. Configure an EBGP peer.
5. Allow the local AS number to
appear in the AS_PATH
attribute of a received route,
and set the maximum number
of times that such case is
allowed to appear.
6. Redistribute remote site routes
advertised by the PE.
7. Configure a filtering policy to
filter the routes to be
advertised.
Command
network-entity net
import-route { isis [ process-id ] |
ospf [ process-id ] | rip
[ process-id ] | bgp [ allow-ibgp ] |
direct | static } [ cost cost |
cost-type { external | internal } |
[ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
quit
interface interface-type
interface-number
isis enable [ process-id ]
Command
system-view
bgp as-number
ipv4-family vpn-instance
vpn-instance-name
peer { group-name | ip-address }
as-number as-number
peer { group-name | ip-address }
allow-as-loop [ number ]
import-route protocol [ process-id
| all-processes ] [ med med-value |
route-policy route-policy-name ] *
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
401
Remarks
Not configured by default.
Optional.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route level
in the command, the command will
redistribute routes to the level-2
routing table by default.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
Optional.
By default, no route redistribution
is configured.
Optional.
By default, BGP does not filter the
routes to be advertised.