Configuring Ospf Dr Election - HP MSR2000 series Configuration Manual

Routing for Network
Destination
0.0.0.0/0
10.2.1.0/24
10.4.1.0/24
Total Nets: 3
Intra Area: 2
Configure route redistribution:
4.
# Configure Switch C to redistribute static routes.
[SwitchC] ip route-static 3.1.3.1 24 10.4.1.2
[SwitchC] ospf
[SwitchC-ospf-1] import-route static
[SwitchC-ospf-1] quit
# Display OSPF routing information on Switch D.
<SwitchD> display ospf routing
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Routing for ASEs
Destination
3.1.3.0/24
Total Nets: 6
Intra Area: 2
The output shows that on Switch D an external route imported from the NSSA area.

Configuring OSPF DR election

Network requirements
In Figure 43, OSPF Switches A, B, C, and D reside on the same network segment.
Configure Switch A as the DR, and configure Switch C as the BDR.
Cost
65536
65535
3
Inter Area: 1
OSPF Process 1 with Router ID 10.5.1.1
Routing Tables
Cost
22
10
25
10
12
Cost
1
Inter Area: 3
Type NextHop
Inter 10.2.1.1
Transit 10.2.1.2
Stub 10.4.1.1
ASE: 0 NSSA: 0
Type NextHop
Inter 10.3.1.1
Transit 10.3.1.2
Inter 10.3.1.1
Stub 10.5.1.1
Inter 10.3.1.1
Type Tag
Type2 1
ASE: 1 NSSA: 0
109
AdvRouter
10.2.1.1
10.4.1.1
10.4.1.1
AdvRouter
10.3.1.1
10.3.1.1
10.3.1.1
10.5.1.1
10.3.1.1
NextHop AdvRouter
10.3.1.1 10.2.1.1
Area
0.0.0.1
0.0.0.1
0.0.0.1
Area
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2