Configuration prerequisites
Before you apply an IPsec policy for RIPng, complete following tasks:
Create an IPsec proposal.
•
Create an IPsec policy.
•
For more information about IPsec policy configuration, see Security Configuration Guide.
Configuration guidelines
An IPsec policy used for RIPng can only be in manual mode. For more information, see Security
Configuration Guide.
Configuration procedure
To apply an IPsec policy in a process:
Step
1.
Enter system view.
2.
Enter RIPng view.
3.
Apply an IPsec policy in the
process.
To apply an IPsec policy on an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Apply an IPsec policy on the
interface.
Displaying and maintaining RIPng
Task
Display configuration information
of a RIPng process.
Display routes in the RIPng
database.
Display the routing information of
a specified RIPng process.
Command
system-view
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
enable ipsec-policy policy-name
Command
system-view
interface interface-type
interface-number
ripng ipsec-policy policy-name
Command
display ripng [ process-id |
vpn-instance vpn-instance-name ]
[ | { begin | exclude | include }
regular-expression ]
display ripng process-id database
[ | { begin | exclude | include }
regular-expression ]
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
266
Remarks
N/A
N/A
Not configured by default.
Remarks
N/A
N/A
Not configured by default.
Remarks
Available in any view
Available in any view
Available in any view