MSS Mana GT ABS
Engine
- Slide off the shaft with the rotor driving pin.
- Remove the two rotors and wash them thorough-
ly.
NOTE
VISUALLY INSPECT THAT ALL THE COMPONENTS ARE
IN GOOD CONDITIONS. THERE MUST BE NO SIGNS OF
WEAR OR SLIPPAGE. IN CASE OF THERE ARE EVIDENT
TRACES OF WEAR, REPLACE THE COMPONENTS.
- Once checked if the components are in good
conditions, assemble the pump and check the
size.
- Assemble the two rotors, and align them following
the reference marks.
ENG - 231