APRILIA MSS Mana GT ABS Service Station Manual page 194

Engine
AP8140595 Axone + battery charger (230V 50Hz)
AP8202311 Axone + battery charger (110V 60Hz)
If the values do not correspond, check:
- distribution timing
- rpm timing sensor
- injection control unit
Timing
- With the TORX wrench, remove the timing check
cap.
- With the references aligned, operate on the driv-
ing pulley to turn the crankshaft until on the fly-
wheel the rear cylinder timing reference mark «1»
is aligned to the crankcase reference, correspond-
ing to the rear piston top dead centre.
- Fit the tone wheel and the timing system gear
with the chain and align the reference marks.
ENG - 194
MSS Mana GT ABS