APRILIA MSS Mana GT ABS Service Station Manual page 54

Troubleshooting
BE CONSULTED BY SELECTING THE "ACTIVATIONS" SCREEN AND THEN (INJECTOR ICON)/
3 - FIND THE MALFUNCTION (SEE THE "ELECTRICAL SYSTEM/CHECKS AND CONTROLS"
4 - TO SOLVE THE MALFUNCTION, IS IT NECESSARY TO REPLACE OR REMOVE THE DRIVING
5 - ONCE THE POTENTIOMETER HAS BEEN REFITTED (SEE "ELECTRICAL SYSTEM/CHECKS
AND CONTROLS/POSITION SENSOR/DRIVING PULLEY/FITTING) AND BEFORE STARTING THE
ENGINE, CARRY OUT THE "POTENTIOMETER RESET" OPERATION WITH AXONE (SEE "ELEC-
TRICAL SYSTEM/CHECKS AND CONTROLS/DRIVING PULLEY POSITION SENSOR/ADJUSTA-
6 - DELETE THE ERROR WITH THE "ERROR CLEARING" FUNCTION - END
7 - TO SOLVE THE MALFUNCTION, IT IS NECESSARY TO REPLACE THE TRANSMISSION ECU
8 - IT IS ALSO NECESSARY TO SOLVE THE BELT PROBLEM, USING AXONE ENTER IN THE ECU
THE GEARSHIFT STROKE CATEGORY OR THE DEFAULT VALUE, AND BEFORE STARTING THE
ENGINE, CARRY OUT THE "POTENTIOMETER RESET" OPERATION WITH AXONE (SEE ELEC-
TRICAL SYSTEM/CHECKS AND CONTROLS/DRIVING PULLEY POSITION SENSOR/ADJUSTA-
H - F - M
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING, CAREFULLY READ THE GENERAL TROU-
BLESHOOTING CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGINNING OF THE CHECK
AND CONTROL SECTION IN THE ELECTRICAL SYSTEM CHAPTER.
•
1 - LETTERS "H"; "F" OR "M" ARE SHOWN ON THE DISPLAY
•
2 - "H" DISPLAYED?
•
3 - IN THE INSTRUMENT PANEL, GO TO "MENU/CONTROL (on handlebar) ENABLING:
ARE THEY ENABLED?
•
4 - CONNECT TO AXONE BY SELECTING "AUTOMATIC" AND CHECK WHICH "ERROR"
IS PRESENT: FOR FURTHER INFORMATION ABOUT THE ERROR AND ITS POSSIBLE
CAUSES, PUSH BUTTON "?" THE AMBIENT PARAMETERS RELATED TO THE ERROR
CAN ALSO BE CONSULTED BY SELECTING THE "ACTIVATIONS" SCREEN AND THEN
(INJECTOR ICON)/ERROR AMBIENT PARAMETER READING
TROUBL - 54
CHAPTER) AND RESTORE THE CORRECT OPERATION
YES, go to 5; NO, go to 7.
YES, go to 8; NO, GO TO 6 - END
YES, go to 3; NO, go to 4.
YES, go to 4; NO, go to 7.
MSS Mana GT ABS
ERROR AMBIENT PARAMETER READING
PULLEY POSITION POTENTIOMETER?
BLE PARAMETERS)
BLE PARAMETERS - END