Braking system
Removal
•
Place the vehicle on its side stand.
•
Loosen the cable adjusting nuts.
•
Slide off the parking brake cable.
•
Undo the two screws.
•
Remove the calliper.
•
Slide off the two pins and remove the two brake pads.
CAUTION
AFTER REMOVING THE PADS, DO NOT OPERATE THE BRAKE LEVER OR THE CALLIPER
PLUNGERS COULD GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID LEAKS.
BRAK SYS - 344
MSS Mana GT ABS