APRILIA MSS Mana GT ABS Service Station Manual page 355

MSS Mana GT ABS
- Slide off the water pump control gear together
with the shaft.
- Undo the two indicated screws and remove the
gear protection plate.
- Introduce a punch on the water pump shaft seat
and remove the oil seal.
See also
Splitting the
crankcase halves
- Fit the oil seal from the outside being careful not
to grease the contact surfaces.
- Operate on the specific tool until it stops.
Specific tooling
020663Y Water pump shaft oil seal punch
Cooling system
COOL SYS - 355