Suspensions
•
Remove the spacer bowl.
•
Remove the lower bushing (1), the
spacer pipe (2) and the upper bushing
(3).
NOTE
THE FOLLOWING OPERATIONS REFER TO THE SACHS FORKS.
NOTE
THE OPERATIONS DESCRIBED BELOW ARE VALID FOR BOTH STEMS.
•
Drain the fork oil.
•
Place the stanchion on a work table in upright position.
•
Be careful not to damage the stanchion when placing it in a vice, in horizontal position, using
the appropriate protections.
•
Unscrew and remove the bottom screw
and collect the special washer.
See also
Draining oil
SUSP - 286
MSS Mana GT ABS