Online Calibration Of Multipoint Adjustment Channels - Bosch DDU 8 Manual

Notice
11.5
Bosch Motorsport
Drag channels
on
Measurement
Sheet
A display alarm can be linked to the trigger channel to indicate
that the trigger has been detected.
Online calibration of multipoint adjustment
channels
Example: measurement of wheel force
▪ Physical property 'wheel force' not directly measureable
▪ Load transfer through suspension kinematics
▪ Physical value at sensor position defined by vehicle
▪ Curve definition by online adjustment at vehicle
Force at sensor
Force at wheel
1. Create a multipoint adjustment measurement channel. To create a multipoint
channel, see chapter 'Configuring a multipoint adjustment
2. Download the configuration on the DDU 8. To connect the DDU 8 to Race‐
Con, see chapter 'Connecting the Unit to RaceCon
3. Click on the desired channel in the DDU 8 Project Tree.
4. Double‐click on a measurement channel in the Data Area to open the online
view.
DDU 8 Manual
Online Measurement | 11
Voltage at
input pin
State of adjustment
0 – Idle
1– Adjustment
triggered
2 – Adjustment lock
time
[} 78]'.
[} 18]'.
101 / 160