Using The Measurement Sheets; Online Calibration Of Measurement Channels; Enable Online Offset Calibration For Measurement Channel - Bosch DDU 7 Manual

102 en | Online Measurement
11.2.2

Using the measurement sheets

1.
2.
3.
11.3

Online calibration of measurement channels

–
–
–
–
11.3.1

Enable online offset calibration for measurement channel

During creation of the measurement channel
04.02.2019 | V 02 |
When RaceCon is online, press the 'F11' key to switch from 'Design Mode' into 'Race
Mode'. The measurement sheet is extended to full screen. The button for offset
calibration is active.
Switch between different sheets using the tabs at the bottom of the page or the keyboard
shortcuts associated with the sheets.
Press the 'Esc' key to return to 'Design Mode'.
Analog sensors drift with age, temperature, etc.
Manual calibration is necessary
Solution: online offset calibration
Example: acceleration sensor
Manual
Display Unit DDU 7
Bosch Motorsport