Bosch DDU 8 Manual page 126

13 | Recording and Telemetry
126 / 160
5. Record measurement data. If an USB device is present, the DDU 8 stores the
data in parallel on the internal memory and the USB device.
6. Power off the system.
7. Remove USB device from the vehicle.
8. Start the WinDarab software.
9. Click on the 'Import/Export' icon.
10. Select 'Data logger CXX/DDUX/MSX' and click 'OK' when done. The 'Read
measurement data' dialog opens.
Click
'Import/
Export'
11. Click on 'Settings' tab and select the option 'Flash Card/USB Stick'.
12. Activate 'Apply changes'.
13. Insert the USB device into the PC. Data transmission from device starts auto‐
matically. Measurement files are stored automatically in the base folder.
14. Click 'Close' when transmission has finished.
DDU 8 Manual Bosch Motorsport