Bosch DDU 8 Manual page 116

13 | Recording and Telemetry
13.2.5
13.2.6
116 / 160
Recording diagnosis
The channel 'statectrl_ok' of the DDU 8 can be used for online monitoring of re‐
cording status.
Bit Value
0 1
1 2
2 4
3 8
4 16
5 32
6 64
7 128
Content of status bits
Name Bitset
RECORD Measurement data is
recorded.
DATAOK Received data without
error.
BLKOK All measurement
blocks have been set
up correctly.
STARTED A measurement has
been set up.
Displaying online recording diagnosis
("statectrl_ok")
1. To add a Recording Diagnosis element to a measurement sheet, drag a 'Bit‐
LED' element from the Toolbox and drop it on measurement sheet.
2. Drag channel 'statectrl_ok' from the Data Area and drop it on the 'Bit‐LED' el‐
ement.
DDU 8 Manual
Name
RECORD
DATAOK
BLKOK
‐
‐
‐
STARTED
‐
Bit cleared
No measurement data will be stored because
measurement thresholds are not reached.
Discarding received data because of wrong
timestamps. Check wiring of SYNC signal.
Some measurement blocks have not been set
up correctly.
A measurement is not set up. Either no record‐
ing configuration has been found or logger
software upgrade is not activated.
Bosch Motorsport