Bosch DDU 8 Manual page 73

10.3.2
Bosch Motorsport
6. Enter channel name and description.
7. Click 'Ok' when done.
The channel is inserted into the DDU 8 Project Tree.
Channel
is linked
to
ANA03
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Configuring a generic linear sensor
Example: Acceleration sensor 5 g
From sensor data sheet – operating characteristics:
Sensitivity 400 mV/g, Offset 2500 mV
The sensor has a linear output signal with sensitivity and offset
1. Click on 'Measurement Sources' in the Toolbox.
2. Expand the list of 'I/O Channels' by clicking on '+' in the DDU 8 Project Tree.
DDU 8 Manual
Analog and Frequency Inputs | 10
Input pin
Calculation of
Pull-up
physical value with
resistor is
characteristic curve
activated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
73 / 160