Bosch DDU 8 Manual page 75

Notice
10.3.3
Bosch Motorsport
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement
7. Click 'Finish' when done.
8. Enter channel name and description.
9. Click 'OK' when done.
The channel is inserted into the DDU 8 Project Tree.
Channel is
linked to
ANA04
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Configuring a generic non‐linear sensor
Example: Thermistor 5 kOhm
▪ From sensor data sheet: resistance values over temperature
DDU 8 Manual
Analog and Frequency Inputs | 10
Sensitivity
Input pin
and Offset
Pull-up
value for
resistor is
sensor
deactivated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
[} 92]'.
Adjustment
is enabled
75 / 160