Leds - Bosch DDU 8 Manual

8.2.6
8.3.1
Bosch Motorsport
1. Double‐click on the display element. The Numeric Wizard window opens.
2. Switch to the tab 'Conditional Formatting'.
The lower and the upper limits are configured in the same way.
a) Check the box to activate the formatting at a lower limit.
b) Enter the limit value when the formatting is active.
c) Enter the limit value when the reset hysteresis function is active. The reset hysteresis function avoids the
high-frequent switchover of the measurement channel value.
d) Choose the borderstyle, background and foreground color of the numeric display element.
e) Click the Extended button to show further options to change the color of the title, border and text
individually. If a 'Bargraph' display element is used, its colors can also be changed.
3. Click 'OK' when done.
Context menu
The context menu appears by right‐clicking on a display element.
8.3

LEDs

The LEDs are fully configurable to show the optimal shifting point. They can also
be configured to flash in case of a customized condition becoming 'true'.
Configuring shift LEDs
To use shift LEDs, RPM and gear measurement channels an ECU has to be loaded
in RaceCon.
1. Click on the tab 'LEDs' in the display view.
Copy element to different page or all pages
Move element to different page
Change type of display element
Remove assigned measurement channel
Delete element
Manage overlapping elements
Insert element into library in toolbox
Show and edit properties
DDU 8 Manual
Display Configuration | 8
43 / 160