Bosch DDU 8 Manual page 113

Notice
Bosch Motorsport
Double-click
to display
configuration
Tabs to access conditions, settings and statistics
3. To add measurement channels to a recording, click 'DDU 8' in the DDU 8
Project Tree. In the Data Area, the measurement channels are displayed.
4. Drag and drop desired measurement channels into recording group.
Click to
display
DDU 8
variables
Activate
these
filters
5. To edit channel's settings, mark the channel(s) and click 'Edit Channel'. An
'Edit Recording Channels' window opens.
If no condition is defined or condition is 'false', measurement
channels are recorded at the value chosen in 'Rate'.
If the condition is 'true', measurement channels are recorded at the value chosen
in 'True rate'.
6. Click 'OK' when done.
DDU 8 Manual
Recording and Telemetry | 13
Variables can be grouped
Recording
Drag measurement
properties
channels into
group
113 / 160