Bosch DDU 8 Manual page 133

14.1.6
Bosch Motorsport
a) Change signal device, if desired.
b) Change signal channel, if desired.
c) Choose signal threshold. See chapter 'Electrical trigger signal' for details.
d) Define threshold of input channel signal when trigger is released. Only possible if no digital source is
selected as signal source.
e) Define settings for lap timing (main trigger). See chapter 'Lap timing' for details.
f) Define settings for segmented timing (sub trigger). See chapter 'Segment timing' for details.
g) Define settings for countdown timer. See chapter 'Countdown timer' for details.
h) Change signal for vehicle speed, if desired.
i) Enter minimum speed for trigger release.
j) Define settings for distance based retrigger protection. See chapter 'Distance based retrigger
protection' for details.
k) Define settings for distance based forced trigger. See chapter 'Distance based forced trigger'
for details.
l) Define presettings for trigger. See chapter 'Lap trigger presettings' for details.
Lap trigger channel diagnosis/counter reset
To display a quick lap trigger channel diagnosis and to reset counters use the di‐
agnosis page in RaceCon. Any 'Laptrigger_xxx' channel can be displayed.
Double‐click on any 'Laptrigger_xxx' channel in the Data Area. Example: 'laptrig‐
ger_lapdist_dls'
A diagnosis window opens in Main Area.
DDU 8 Manual
Lap Trigger | 14
Button to reset lap distance to 0
Button to reset lap counter
Button to reset outing counter
Button to generate trigger signal
Button to reset best lap time
Button to reset best lap time and
distance-based segmentation
133 / 160