Xerox WorkCentre 3210 Service Manual page 263

WorkCentre 3210/3220 Multifunction Printer Service Manual
Note
The middle cover remains with the printer.
4. Disconnect the wiring harness connectors CN3, CN4, CN5, CN8, CN22,
and USB connector from the Main Controller Board.
5. Remove 1 screw (12 mm, silver) that secures the ground wire.
6. Push the Platen Assembly toward the rear to release the 2 tabs.
7. Lift and remove the Platen Assembly.
CN22
Service Parts Disassembly
USB Connector
Ground Screw
CN3
CN5
s3210mfp-160
s3210mfp-221
8-49