Service Parts Disassembly
Scan Drive Unit
PL6.3.1-10-15
8-54
1.
Remove the Right Cover (page 8-62).
2.
Disconnect the wiring harness connector CN3 from the Main Controller
Board.
3.
Remove the Control Panel (page 8-67).
4.
Remove the Upper Platen (page 8-57).
5.
Remove 4 screws (12 mm, silver) that secure the lower scan frame.
WorkCentre 3210/3220 Multifunction Printer Service Manual
CN3
s3210mfp-231
s3210mfp-175