Xerox WorkCentre 3210 Service Manual page 20

xviii
9. Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the equipment (PC) associated with this
device. The associated shall be set to operate within the following limits
for compliance with Telecom's Specifications:
For repeat calls to the same number:
There shall be no more than 10 call attempts to the same number
within any 30 minute period for any single manual call initiation, and
The equipment shall go on-hook for a period of not less than 30
seconds between the end of one attempt and the beginning of the
next attempt.
For automatic calls to different numbers:
The equipment shall be set to ensure that automatic calls to different
numbers are spaced such that there is no less than 5 seconds
between the end of one call attempt and the beginning of another.
10. For correct operation, total of the RN's of all devices connected to a single
line at any time should not exceed 5.
WorkCentre 3210/3220 Multifunction Printer Service Manual