Administering through the configuration file
Parameter
Default value
P51
0
P87
0
P1348
0
P1684
1
Related links
Administering through the configuration file
Web access parameters
Parameter
Default value
P196
-
P2
-
Related links
Administering through the configuration file
Deskphone upgrading and provisioning parameters
During the upgrade, if the deskphone receives a call, the deskphone starts ringing. If the user does
not answer the call, the deskphone continues to ring till the upgrade completes. Therefore, you must
plan the upgrade during the off hours.
June 2016
Description
Specifies the VLAN tag of the Layer 2 QoS packets. Assign any value in
the range of 0 to 4094.
Specifies the priority value of the Layer 2 QoS packets. Assign any value in
the range of 0 to 7.
Specifies the PC port mode. Assign any of the following values:
• 0: Enable
• 1: Disabled
• 2: Mirrored
If you assign the value 2, the traffic in the LAN port goes through the
personal computer port and the system can capture packets if you connect
the computer to the PC port.
Specifies whether to enable the LLDP service. Assign any of the following
values.
• 0: Disabled
• 1: Enabled
LLDP-MED is supported only for VLAN priority and Tag value. If Avaya-
proprietary LLDP is not supported, use DHCP to receive file server or SIP
server address parameters.
on page 56
Description
Specifies user password.
Specifies administrator password.
on page 56
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
74