Configuring The Upgrade And Provisioning Settings; Upgrading And Provisioning Settings Field Descriptions - Avaya E129 Administering

Name
Confirm Password
Related links
Administering through the Web GUI

Configuring the upgrade and provisioning settings

About this task
Use the following procedure to upgrade the firmware of the deskphone. During the upgrade, if the
deskphone receives a call, the deskphone starts ringing. If the user does not answer the call, the
deskphone continues to ring till the upgrade completes. Therefore, you must plan the upgrade
during the off hours.
Procedure
1. Click Maintenance > Upgrade and Provisioning.
The system displays the Upgrade and Provisioning page.
2. Enter the required details for each field.
3. Click Save.
4. Click Reboot at the upper-right corner of the page for the changes to take effect.
Related links
Administering through the Web GUI

Upgrading and provisioning settings field descriptions

Name
Firmware Upgrade and Provisioning
June 2016
Description
The default password is admin. You must change
the default password.
Specifies the administrator password for
confirmation.
on page 19
on page 19
Description
Specifies whether the deskphone checks and installs
a new firmware every time the deskphone boots up:
The options are:
• Always Check for New Firmware: The
deskphone always checks for a new firmware.
• Check New Firmware Only When F/W pre/suffix
Changes: The deskphone always checks for a
change in the prefix or suffix of the firmware file.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Maintaining the deskphone
Table continues...
43