Basic Network Settings Parameters - Avaya E129 Administering

Parameter Default value
P72 1
Related links
Administering through the configuration file

Basic network settings parameters

Parameter Default value
P1415 0
P8 0
P146
P148
P82
P83
P269
P9
P10
P11
June 2016
Description
Specifies whether the # key is used to immediately dial out the input digits.
Assign any of the following values:
• 0: No
• 1: Yes
on page 56
Description
Specifies Internet Protocol that the deskphone uses. Assign any of the
following values:
• 0: IPv4
• 1: IPv6
Specifies the method for the phone to obtain the IPv4 address. Assign any
of the following values:
• 0: DHCP. You must also specify the parameters P146 and P148.
• 1: Static. You must also specify the parameters P9, P10, P11, P12, P13,
P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24, P25, P26, P27,
P28, P92, P93, P94, P95, P1419, P1424, P1425, P1423, P1426, P1420,
P1421, and P1422.
• 2: PPPoE. You must also specify the parameters P82, P83, and P269.
Specifies the name of the client. This field is optional but some Internet
Service Providers might require it. The maximum length is 64 characters.
Specifies vendor class ID that client and servers exchange. The maximum
length is 64 characters.
Specifies the PPPoE account ID.
Specifies the PPPoE password. Must not contain an apostrophe (') or a
quote (").
Specifies the PPPoE service name.
Specifies the first octet of the IP address. Assign any value in the range of
0 to 255.
Specifies the second octet of the IP address. Assign any value in the range
of 0 to 255.
Specifies the third octet of the IP address. Assign any value in the range of
0 to 255.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Basic network settings parameters
Table continues...
71