Advanced Network Settings Parameters - Avaya E129 Administering

Parameter Default value
P95
P1419 0
P1424
P1425
P1423
P1426
P1420
P1421
P1422
Related links
Administering through the configuration file

Advanced network settings parameters

Parameter Default value
P7901 0
P7902
P7903
P1552
P1553
P38 12
June 2016
Description
Specifies the fourth octet of the preferred DNS server. Assign any value in
the range of 0 to 255.
Specifies the method for the phone to obtain the IPv4 address. Assign any
of the following values:
• 0: Auto-configured
• 1: Statically configured:
Specifies the first DNS Server for IPv6 address.
Specifies the second DNS Server for IPv6 address.
Specifies the preferred DNS Server for IPv6 address.
Specifies the IPv6 address type. Assign any of the following values:
• 0: Full static. You must also specify the parameters P1420 and P1421.
• 1: Prefix static. You must also specify the parameter P1422
Specifies the static IPv6 address.
Specifies the IPv6 prefix length.
Specifies the IPv6 prefix.
on page 56
Description
Specifies whether to enable the 802.1X mode. Assign any of the following
values:
• 0: Disable
• 1: EAP-MD5
Specifies the identity for the 802.1X mode. The maximum length is 64
characters.
Specifies the MD5 password. The maximum length is 64 characters.
Specifies the HTTP proxy URL where the deskphone sends the packets.
The proxy server is an intermediary to route the packets to the destination.
Specifies the HTTPS proxy URL where the dseskphone sends the packets.
The proxy server is an intermediary to route the packets to the destination.
Specifies the Layer 3 QoS parameter. This value is used for IP
Precedence, Diff-Serv, or MPLS. Assign any value in the range of 0 to 63.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Advanced network settings parameters
Table continues...
73