Avaya E129 Administering page 68

Administering through the configuration file
Parameter Default value
P290 { x+ | *x+ |
*xx*x+ }
P139 20
P191 1
P182 0
P104 0
P1488
June 2016
Description
Specifies the dial plan for the phone. The dial plan establishes the
expected number and pattern of digits for a telephone number. You can
use the following rules to establish the dial plan:
• Accepted digits and characters: 0 to 9, *, #, A to D, a to d.
• x: Represents any digit from 0 to 9.
• xx+: Represents at least a 2 digit number.
• ^: Excludes the following digits or characters.
• [x-y]: Includes any digit from the range x to y.
• <x=yz>: Replaces digit x with digits y and z when dialing.
• |: Represents the Or operation.
• ,: Use comma for adding a secondary dial tone in the dial plan. Comma
takes the higher precedence over Or in the dial plan. Use of caret ^ is not
supported after comma. You cannot replace digits after a comma.
For example, {^1900x+ | <=1617>xxxxxxx} that specifies to block any
number of leading digits 1900 or add prefix 1617 for any dialed 7 digit
numbers.
Specifies the timeout in seconds before the phone forwards the call on no
answer. Specify any value from 1 to 120.
Specifies whether the DND, call forward, and other features can be set
through the local feature code on the phone or through the ITSP feature
code. Assign any of the following values:
• 0: No
• 1: Yes
Specifies the call log settings for the phone. Assign any of the following
values:
• 0: Log all calls
• 1: Log incoming and outgoing calls only. Missed calls are nor recorded.
• 2: Disable call log
Specifies the ring tone for the account. Assign any of the following values:
• 0: System ring tone
• 1: Custom ring tone 1
• 2: Custom ring tone 2
• 3: Custom ring tone 3
Specifies the first matching rule. You can specify the matching rules
through:
• A specific caller ID number, such as 8321123.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Table continues...
68