Name
System Ring Tone
Dial Tone
Message Waiting
Ring Back Tone
Call Waiting Tone Gain
Busy Tone
Reorder Tone
Related links
Administering through the Web GUI
Configuring the audio control settings
Procedure
1. Click Settings > Audio Control.
The system displays the Audio Control page.
2. Enter the required details for each field.
3. Click Save.
Related links
Administering through the Web GUI
Audio control settings field descriptions
Name
Headset
June 2016
Description
Use the following syntax to specify frequencies and
cadence for a ring tone.
f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; where
• f1 and f2 are frequencies in Hz.
• c is cadence on and off in ms. The system
supports up to three cadences.
For example, f1=440,f2=480,c=200/400;
Specifies frequency and cadence for system ring
tone.
Specifies frequency and cadence for dial tone.
Specifies frequency and cadence for message
waiting.
Specifies frequency and cadence for ring back tone.
Specifies frequency and cadence for call waiting
tone gain.
Specifies frequency and cadence for busy tone.
Specifies frequency and cadence for reorder tone.
on page 19
on page 19
Description
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Managing the deskphone settings
Table continues...
35