Chapter 4: Configuring The Phone Using Web Interface; Enabling Access To Web Interface Of The Phone; Enabling Access To The Web Interface Through The Phone Administration Menu - Avaya J100 Series Installing

Chapter 4: Configuring the phone using

Enabling access to web interface of the phone

Administrators can enable access to the web interface of the phone through one of the following
methods:
• By using the phone Administration menu.
• By setting the required parameter in the 46xxsettings.txt file.
Related links

Enabling access to the web interface through the Phone Administration menu

Enabling web interface access through the settings file
Viewing IP address of the phone
Enabling access to the web interface through the Phone
Administration menu
Procedure
1. On the phone, press Main Menu.
2. Scroll to Administration, and press Select.
3. In the Access code field, enter the administration password.
The default access code is 27238.
4. Press Enter.
5. Scroll to Web Server, and press Select.
You can enable or disable access to the web interface only in third-party call control set up.
6. Scroll to Web on HTTP, and Toggle to Yes.
7. Press one of the following:
• Save
• OK
December 2018
web interface
on page 42
Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
on page 42
on page 41
41