Configuring The Ring Tone Settings; Ring Tone Settings Field Descriptions - Avaya E129 Administering

Administering through the Web GUI
Name
Click-To-Dial Feature
Blink message LED on ringing
Call History Flash Writing
Write Timeout
Max Unsaved Log
Related links
Administering through the Web GUI

Configuring the ring tone settings

Procedure
1. Click Settings > Ring Tone.
The system displays the Ring Tone page.
2. Enter the required details for each field.
3. Click Save.
Related links
Administering through the Web GUI

Ring tone settings field descriptions

Name
Call Progress Tones
June 2016
Description
Specifies whether to enable the Click-To-Dial
feature.
Note:
Avaya E129 SIP Deskphone does not support
this parameter.
Specifies whether the deskphone blinks the
Message LED for an incoming call.
Specifies the interval in seconds for the deskphone
to save the call history to the flash memory. The
default value is 300 seconds and 0 implies that the
option is disabled.
Specifies the interval in seconds for the deskphone
to save the call history to the flash memory. You can
specify any value in the rage of 30 to 3600.
Specifies the number of unsaved logs before the
deskphone writes them to the flash memory. You
can specify any value in the rage of 0 to 500.
on page 19
on page 19
Description
Displays the syntax of specifying the frequency and
cadence for ring tones that the deskphone plays at
various instances.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Table continues...
34