Configuring The Call Features Settings; Call Features Settings Field Descriptions - Avaya E129 Administering

Configuring the call features settings

Procedure
1. Click Settings > Call Features.
The system displays the Call Features page.
2. Enter the required details for each field.
3. Click Save.
Related links
Administering through the Web GUI

Call features settings field descriptions

Name
Off-hook Auto Dial
Off-hook Timeout
Disable Call Waiting
Disable Call Waiting Tone
Use Quick IP Call Mode
Disable in-call DTMF Display
Enable Sending DTMF via Speed Dial
In-call Dial Number on Pressing Transfer Key
Auto-Attended Transfer
Do Not Escape '#' as %23 in SIP URI
June 2016
on page 19
Description
Specifies the number that the deskphone dials when
the deskphone is off-hook.
Specifies the time in seconds after which the
deskphone goes on-hook after being off-hook. You
can specify any value in the range of 10 to 60.
Specifies whether to disable the call waiting feature.
Specifies whether to disable the call waiting tone
when the Call Waiting feature is active.
Specifies whether the user can dial an IP address
under the same LAN or VPN segment by entering
the last octet in the IP address.
Note:
Avaya E129 SIP Deskphone does not support
this parameter.
Specifies whether the deskphone displays the DTMF
digits that the user enters during a call.
Specifies whether to enable Speed Dial Key to send
DTMF during a call.
Specifies the number that the deskphone dials as
DTMF when the user presses the Transfer button.
Specifies whether the deskphone uses the attended
transfer by default.
Specifies whether the deskphone replaces # by %23
for some special situations.
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Managing the deskphone settings
Table continues...
33