Audio Control Parameters - Avaya E129 Administering

Administering through the configuration file
Parameter Default value
P343 Null
P344 Null
P346 Null
P347 Null
P1555 Null
P348 Null
P349 Null
Related links
Administering through the configuration file

Audio control parameters

Parameter Default value
P1312 0
P1487 0
P1439 0
P1301 0
June 2016
Decsription
Specifies frequency and cadence for dial tone. Use the syntax as specified
in the parameter P345.
Specifies frequency and cadence for message waiting. Use the syntax as
specified in the parameter P345.
Specifies frequency and cadence for ring back tone. Use the syntax as
specified in the parameter P345.
Specifies frequency and cadence for ring back tone. Use the syntax as
specified in the parameter P345.
Specifies frequency and cadence for call waiting tone gain. Use the syntax
as specified in the parameter P345.
Specifies frequency and cadence for busy tone. Use the syntax as
specified in the parameter P345.
Specifies frequency and cadence for reorder tone. Use the syntax as
specified in the parameter P345.
on page 56
Description
Specifies the mode for the headset button when a headset is connected to
the deskphone. Assign any of the following values:
• 0: Default mode
1: Toggle Headset/Speaker
Specifies the headset type. Assign any of the following values:
• 0: Normal, an RJ9 headset
• 1: Plantronics EHS
Specifies whether to enable the speaker to ring when the deskphone uses
the headset in the Toggle Headset/Speaker mode. Assign any of the
following values:
• 0: No
• 1: Yes
Specifies the transmission gain of the headset. Assign any of the following
values:
• 0: 0 decibel
• 1: –6 decibel
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Table continues...
84