Configuring The Syslog Settings - Avaya E129 Administering

Name
Automatic Upgrade
Hour of the Day(0-23)
Day of the Week (0-6)
Authenticate Conf File
Related links
Administering through the Web GUI

Configuring the syslog settings

About this task
You must reboot the deskphone to apply the syslog settings.
Procedure
1. Click Maintenance > Syslog.
June 2016
Description
Note:
You must use the configuration file to enter the
SIP server list as the DHCP Option 120 has
certain limitations.
Specifies whether the deskphone checks and installs
a new firmware. The options are:
• No: The deskphone does not check for a new
firmware.
• Yes, check for upgrade every x minute(s): The
deskphone checks for a new firmware after every x
minutes.
• Yes, check for upgrade every day: The
deskphone checks for a new firmware every day.
• Yes, check for upgrade every week: The
deskphone checks for a new firmware every week.
Enabling the automatic upgrade is a preferred option
as the deskphone gets a firmware upgrade without
you rebooting the deskphone for an upgrade.
Specifies the hour of the day when the deskphone
checks the HTTP/TFTP server for a firmware
upgrade or configuration file changes.
Specifies the day of the week when the deskphone
checks the HTTP/TFTP server for a firmware
upgrade or configuration file changes.
Specifies whether the deskphone authenticates the
configuration file before accepting the file. The
options are:
• No
• Yes
on page 19
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Maintaining the deskphone
45