Ring Tone Parameters - Avaya E129 Administering

Parameter Default value
P1406 0
P1561 0
P1696 0
P1433 300
P1434 200
P1311 0
Related links
Administering through the configuration file

Ring tone parameters

Parameter Default value
P345 Null
June 2016
Description
Specifies whether the deskphone replaces # by %23 for some special
situations. Assign any of the following values:
• 0: No
• 1: Yes
Specifies whether to enable the Click-To-Dial feature. Assign any of the
following values:
• 0: No
• 1: Yes
Specifies whether the deskphone blinks the Message LED for an incoming
call. Assign any of the following values:
• 0: No
• 1: Yes
Specifies the interval in seconds for the deskphone to save the call history
to the flash memory. 0 implies that the option is disabled.
Specifies the number of unsaved logs before the deskphone writes them to
the flash memory. Assign any value in the rage of 0 to 500.
Specifies whether local conferences are enabled.
• 0: Disabled
• 1: Enabled
on page 56
Decsription
Specifies frequency and cadence for system ring tone.
Use the following syntax to specify frequencies and cadence for a ring
tone.
f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; where
• f1 and f2 are frequencies in Hz.
• c is cadence on and off in ms. The system supports up to three
cadences.
For example, f1=440,f2=480,c=200/400;
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Ring tone parameters
Table continues...
83