Operation Error - Toshiba GD-1040 Service Manual

1.6 Operation Error

Display
NETWORK ACCESS
ERROR
NETWORK
INITIALIZING
INVALID ZERO DATA
CANNOT SET TCP/IP
INVALID HOST NAME
INVALID E-MAIL ADDR
INVALID ERR E-MAIL
INVALID POP3 LOGIN
INVALID POP3 PWD
INVALID FTP LGN
NAME
INVALID FTP PASS-
WORD
ENTRY AREA FULL
INVALID DATA
May 2001 © TOSHIBA TEC
Cause
The Network Interface Card or
Internet Fax unit has been damaged.
The Network Interface Card is
initializing.
"0" is entered at "Body Page Limit" or
"000" is set to any 8-digit section of
"IP address".
This error message is displayed by
setting the IP address, Subnetmask,
and Default Gateway while the
machine obtains the TCP/IP settings
from the DHCP server.
The invalid character is entered for
Host Name.
The invalid character is entered for E-
mail Address.
The invalid character is entered for
Error E-mail Forward Address.
The invalid character is entered for
POP Login Name.
The invalid character is entered for POP
Password.
The invalid character is entered for FTP
Server Login Name.
The invalid character is entered for
FTP Server Login Password.
There is not enough memory to store
the One Touch key, Speed Dial, or
dialing history.
The communication problems in the
interfaces between the Mother PCB
and I-FAX PCB occur.
The Network Interface Card or
Internet Fax unit must be replaced.
Wait until the Network Interface Card
completes initializing.
Input a correct value.
Set OFF the "BootP/DHCP" to assign
the TCP/IP manually.
Input a correct value.
Delete the unnecessary address
data.
Turn off the machine and then turn on
to restart the machine. If the error
cannot be recovered, the Internet Fax
unit or the Mother PCB of the ma-
chine must be replaced.
5-3
Solution
Internet Fax Kit - Troubleshooting