Table of Contents
Advertisement
4. Onramp Gateway Setup
4.1 How the Onramp Gateway transmission works
Onramp Gateway uses the relay function which is one of the ITU-T Mailbox features. The
ITU-T F-code compliant facsimiles can send the document to the Relay Mailbox in the ma-
chine and then the machine transfers to the E-mail addresses of other Internet Fax machines
and client computers programmed in the Relay Box.
ITU-T compatible
G3 FAX
DP120F/DP125F
Relay Box
2. The E-mail addresses
are assigned to the end
stations in the Relay Box.
1. The facsimile is sent to the Re-
lay Box of the machine through
the public switched telephone
line.
4.2 How to setup for the Onramp Gateway
To use this machine as the Hub Station for Onramp Gateway transmission, set up a Relay Box
in the DP120F/DP125F hub unit. Using this function, all ITU-T F-code compliant facsimiles
can receive or transmit documents to and from the DP120F/DP125F. Relay Boxes must be
setup prior to utilizing the DP120F/DP125F as a Relay Box Hub.
You can assign a maximum of 50 End Stations. Both E-mail addresses and facsimile numbers
can be assigned in a Relay Box. When the End Stations are the facsimile numbers, you can
assign them using Abbreviated Dial Numbers, One Touch Keys, and Group Numbers. Howev-
er, when the End Stations are E-mail addresses, you can assign them only using Abbreviated
Dial Numbers and One Touch Keys.
Internet Fax Kit - Function Settings
3. The facsimile is converted to an
E-mail and forwarded to a mail
server through the LAN.
Mail Server
I-FAX
Fig. 1-4-1
4. The E-mail is delivered
through the Internet, and
transferred to the end sta-
tions.
Mail Server
Internet
Mail Server
3-22
Internet FAX
machine
Personal Computer
May 2001 © TOSHIBA TEC
Advertisement
Table of Contents
