Toshiba GD-1040 Service Manual page 30

Chapter 3
The Function Settings are used to set various requirements for the user. The function setting is
done by either a menu-selection method or by setting the numeric value. It is possible to select
any function by pressing the [MENU] key, then the [ ↑ ] and [ ↓ ] keys, then [ENTER], or the
numeric key for that function. For the initial value list, refer to "Chapter 12 APPENDIX".
<Remarks>
<Remarks>
<Remarks>
May 2001 © TOSHIBA TEC
Function Settings
To select a menu item, you may use the [ ↑ ] and [ ↓ ] keys to highlight the
required item followed by pressing the [ENTER] key, as described above,
or you may directly enter the item number through the numeric key.
If the first item is highlighted, the [ ↑ ] key will not have any effect. If the
last item is highlighted, the [ ↓ ] key will not return to the first item.
The keystrokes needed to access the various function settings will be
shown with uppercase letters and brackets. For example, [MENU] or [EN-
TER] means to press the Menu Key or the Enter Key.
3-1 Internet Fax Kit - Function Settings