Table of Contents
Advertisement
(3)
The New Host dialog appears. Enter the host name and IP address of the Exchange
Server and click on [Add Host].
(4)
Enter the host name and IP address of the Internet Fax unit and click on [Add Host].
(5)
When all host names that you require are added, click on [Done] to close the New Host
dialog.
(6)
Click on the [DNS] menu and select [New Record...] to add a MX record for the Ex-
change Server.
(7)
The New Resource Record dialog appears. Select "MX Record" in the Record Type list,
and enter the host name and Mail Exchange Server DNS Name for the Exchange Server.
At the [Preference Number], enter "10" and click on [OK].
(8)
Click on the [DNS] menu and select [New Record...] to add a MX record for the Internet
Fax unit. (This is required when you perform the Offramp Gateway transmission using
the Internet Fax unit.)
(9)
The New Resource Record dialog appears. Select "MX Record" in the Record Type list,
and enter the host name and Mail Exchange Server DNS Name for the Internet Fax unit.
At the [Preference Number], enter "10" and click on [OK].
(10) Restart you computer (or restart the DNS Service).
4.2 Configuring Microsoft Exchange Server
4.2.1 Installing Microsoft Exchange Server
(1)
Insert the CD-ROM for the Microsoft Exchange Server and start the installer.
(2)
The Organization and Site screen appears. Select [Create a new site], and then enter
the Organization Name and Site Name. Those will be the MTA's domain name. For
example, when you enter "EXCH" for the Organization Name and "TOSHIBA" for the
Site Name, the MTA's domain name will be "EXCH.TOSHIBA.com".
(3)
Click on [OK].
(4)
The Microsoft Exchange Server Setup screen appears. Click on [Run Optimizer].
(5)
The Microsoft Exchange Performance Optimizer screen appears. Click on [Next].
(6)
The screen shows how the system parameters should be configured. If you do not have
to change this items, use the default settings and click on [Next].
(7)
The Warning message is displayed. Click on [Next].
(8)
The Restart Services list is displayed. Click on [Finish] to complete the installation.
4.2.2 Creating Internet Mail Service
(1)
Click on [Start] and select [Programs]-[Microsoft Exchange]-[Microsoft Exchange Ad-
ministrator].
(2)
The Connect to server dialog appears. Click on [Browse].
(3)
The Server Browser dialog appears. Select this server and click on [OK].
(4)
Click on [OK] to connect to the server.
(5)
The Microsoft Exchange Administrator starts.
(7)
Select the "connections" container at the left menu.
(6)
Click on the [File] menu and select [New Other]-[Internet Mail Service...].
(7)
The Internet Mail Wizard appears. Click on [Next].
(8)
Click on [Next].
Internet FAX Kit - Mail Server Setup
4-20
May 2001 © TOSHIBA TEC
Advertisement
Table of Contents
