Table of Contents
Advertisement
(9)
Select the Exchange Server Name to install the Internet Mail Service. Click on [Next].
NOTE:
If you do not install the DNS server on your computer, the error message is displayed
after clicking on [Next]. In this case, install the DSN server and try again. Or if the DNS
server is running another PC, you have to set up the TCP/IP Protocol on this computer to
use the DNS server. To do this, open the TCP/IP Protocol Properties dialog from the
Network properties, and enter the Host Name and Domain of DNS server at the [DNS]
tab.
(10) Select [Use domain name system [DNS] to send mail (Typical)] and click on [Next].
(11) Select [All internet mail addresses (Typical)] and click on [Next].
(12) The domain name of the Internet mail address is displayed. Usually use the entered
address. Click on [Next].
(13) Select [(Create/Use) the mailbox called Administrator] and click on [Next].
(14) Enter the administrator password and click on [Next].
(15) Click on [Finish]. The Installing Internet Mail Service message is displayed.
(16) After few minutes, the message is displayed that tells you the Internet Mail Service suc-
cessfully installed and started. Click on [OK] to complete the operation.
4.2.3 Creating Internet Mail Account for Users
(1)
Click on [Start] and select [Programs]-[Microsoft Exchange]-[Microsoft Exchange Ad-
ministrator].
(2)
Select the "recipients" container at the left menu.
(3)
Click on the [File] menu and select [New Mailbox].
(4)
The Properties dialog appears. At the [General] tab, enter the user name in the [Display]
field and [Alias] field, and click on [OK].
(5)
The Primary Windows NT Account dialog appears. Select [Create a new Windows NT
account] and click on [OK].
(6)
The Create Windows NT Account dialog appears. Usually use the value already en-
tered. Click on [OK].
(7)
The Warning message is displayed. This message tells that the password for new ac-
count set as no password (blank). In this case, the user can decide the password at the
first time the user connects to the mail server.
(8)
Click on [OK].
NOTE:
If you want to set the password for an account other than allowing to user to set the
password, use the User Manager in the Administrator's Tool Program folder to set a
permanent password.
May 2001 © TOSHIBA TEC
4-21
Internet FAX Kit - Mail Server Setup
Advertisement
Table of Contents
