Configuring Qpopper - Toshiba GD-1040 Service Manual

STATIC_ROUTE_FILE=sendmail.route
# domain names to be deliverd directly (all/none/"domain names")
DIRECT_DELIVER_DOMAINS=all
# LOCAL_HOST_* does not check senders address
# '159.119' means '159.119.*.*'.
LOCAL_HOST_IPADDR=159.119
LOCAL_HOST_DOMAIN=tais.net
# ALLOW_RELAY_* does not check relay address
ALLOW_RELAY_TO=tais.net
#--- sendmail-ifax.def
sendmail.route is read from sendmail-ifax.def's configuration. This file describe static routes of
mail transfer. GW line is written the protocol using mail transfer and mail server name. This
mail server name must be registered in /etc/hosts. DOM line is written a domain name(right
side of @ mark) of the mail address.
#--- sendmail.route
GW smtp:ifax.tais.net
DOM tais.net
#--- sendmail.route
Case 2
The following figure shows another example of network environment.
tais.net has IP addresses which are 159.119.*.*.
Internet
sendmail-ifax.def and tais.net's zone file sets up like Case 1.
sendmail.route configuration is as follows.
#--- sendmail.route
GW smtp:ifax.mail.tais.net
DOM tais.net
#--- sendmail.route

2.2 Configuring Qpopper

2.2.1 Installing Qpopper
(1) If you have not get Qpopper, please get the program. You can download from the Internet.
The URL is "ftp://ftp.qualcomm.com/eudora/servers/unix/popper/".
(2) You may have "qpopper4.x.x.tar.gz" file (latest version is "qpopper4.0.2.tar.gz"). Enter
the following command to extract the files:
$ tar zxvf qpopper4.0.2.tar.gz
$ cd qpopper4.0
May 2001 © TOSHIBA TEC
sendmail
MX
mail.tais.net
Static
(dp120@tias.net)
4-13
iFax
Internet FAX Kit - Mail Server Setup