Request Dsn; E-Mail To Fax Gateway - Toshiba GD-1040 Service Manual

3.8 Request DSN

This sets whether or not the DSN is requested when sending a document from the machine
using the Internet Fax function.
DSN: Delivery Status Notification, is used to notify the sender of the status of the mes-
sage that has been sent. The status, such as failed delivery, delayed delivery,
successful delivery, or the gatewaying of a message into an environment that
may not support DSNs, is notified when an E-mail with the DSN request is sent.
NOTE:
The DSN may not reply when the Incoming E-mail server of the recipient does not sup-
port or generate the DSN. In this case, the error logs are retained in the E-mail server of
the recipient. These error logs may be an obstacle to the mail server. Therefore, it is
recommended to select OFF for this function if you are not sure that the E-mail server of
the recipient supports the DSN.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press the
(1)
[ENTER] key.
REQUEST DSN
1.ON
2.OFF
ON
Selected to send the DSN request when the E-mail has been sent from this machine.
OFF
Selected not to send the DSN request when the E-mail has been sent from this machine.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
3.9 E-mail to FAX Gateway [MENU], [4], [6], [0], [9]
This sets the machine to allow forwarding the document that is received by the Offramp Gate-
way transmission. This is available only when the Receive Mode is set to "SMTP".
NOTE:
If this is set to ON, it is recommended to set up "Gateway Print" and "Gateway Security".
May 2001 © TOSHIBA TEC
[MENU], [4], [6], [0], [8]
3-17 Internet Fax Kit - Function Settings