Toshiba GD-1040 Service Manual page 65

(26) Click on [Router/SMTP] tab and view the [Basics] tab. Make the following settings.
Number of mailboxes
SMTP used when sending messages outside of
the local internet domain
SMTP allowed within the local internet domain
Servers within the local Notes domain are
reachable via SMTP over TCP/IP
Address lookup
Exhaustive lookup
Relay host for messages leaving the local internet No entry for the default setting. Enter the
domain
Local Internet domain smart host
Smart host is used for all local internet domain
recipients
Host name lookup
(27) Click on the [MIME] tab and [Advanced] tab, and view the [Advanced Outbound Mes-
sage Options] tab. Make the following settings.
Macintosh attachment conversion
RFC822 phrase handling
Internet Mail server sends Notes private items in
messages
Notes fields to be removed from headers
When converting a multilingual message to MIME Select [Send it in Unicode (UTF8)].
Character set name aliases
(28) When all settings are completed, click on [Save and Close] to save the settings.
(29) Click on [Connection] under [Server] at the left menu, and click on [Add Connection].
(30) View the [Basics] tab and make the following settings.
Connection Type
Source server
Connect via
Destination server
Destination domain
SMTP MTA relay host
May 2001 © TOSHIBA TEC
Items
Items
Items
4-5
Description of Setting
Enter "2". Increase the number depending
on the number of users. Low number may
affect performance.
Select "Enabled".
Select "All messages".
Select "Always".
Select "Fullname then Local Part".
Select "Disabled".
IP address for other mail server sends
email through the designated mail server.
Not required.
Select "Disabled".
Select "Dynamic then local".
Description of Setting
Select "AppleDouble (base64 only)".
Select "Use alt. name if available - other-
wise DN".
Select "Disabled".
Remove the setting and leave this blank.
Not required.
Description of Setting
Select "SMTP".
Use the default value. (Already entered.)
Select "Direct connection".
Enter the same entry as the Source server.
field.
Optional. Enter the "internet".
Not required.
Internet FAX Kit - Mail Server Setup