Table of Contents
Advertisement
1.10 Test Error
These error messages are displayed only in Test Mode.
Display
COMMAND ERROR
S-MEDIA NOT EXIST
RAM 0B:NG
RAM 1C:NG
CHKSUM ERR:
PROGRAM
CHKSUM ERR:
FUNCTION
CHKSUM ERR:
LANGUAGE
CHKSUM ERR:
BOOT
May 2001 © TOSHIBA TEC
Cause
The command error occurs while
performing the Network Test.
The Smart Media is not inserted while
performing the Smart Test.
The RAM has become defective.
The programming data has been
damaged.
The function setting data has been
damaged.
The language data has been dam-
aged.
The boot programming data has been
damaged.
Replace the Internet Fax unit.
Insert the Smart Media in the Smart
Media slot.
Replace the Internet Fax unit.
Perform firmware downloading to
overwrite the data. If this Error
Message is repeatedly displayed,
replace the Internet Fax unit.
5-5
Solution
Internet Fax Kit - Troubleshooting
Advertisement
Table of Contents
