Toshiba GD-1040 Service Manual page 77

The descriptions of these files are as following:
me
Write the FQDN of the mail server to this file. This file is used as a default value when
there are not other files, defaultdomain, locals, plusdomain, and rcphosts.
Example:
mail.toshiba.com
defaultdomain
Write a domain name that is added after the host part when the domain name of an E-
mail address is without a dot.
Example:
toshiba.com
(In this case, an E-mail address "ifax@ifax" becomes "ifax@ifax.toshiba.com".)
defaulthost
Write a domain name that is added after the name when "@domainname" is abridged
from an E-mail address.
Example:
toshiba.com
(In this case, an E-mail address "ifax" becames "ifax@toshiba.com".)
locals
Write domain names which the email server transfers as a local transmission. When
a received E-mail contains the domain name written in this file, the E-mail is controlled
by qmail-local.
Example:
localhost
localhost.ifax.toshiba.com
mail.toshiba.com
ifax.toshiba.com
plusdomain
Write a domain name that is added after "+" when the domain name of an E-mail
address is finished with "+". (For example, "ifax@ifax+")
rcpthosts
Write domain names that the mail server should receive from the Internet. The domain
name which may appear in RCPT of SMTP. The mail of domain which has not ap-
peared in rcpthosts is not received.
When writing a domain name started with a dot (for example, ".toshiba.com"), this
means that the email server receives all E-mails contains the domain "toshiba.com".
NOTE:
rcpthosts is disregarded when environment variable RELAYCLIENT is set up. In this
case, qmail-smtpd receives all mails.
May 2001 © TOSHIBA TEC 4-17 Internet FAX Kit - Mail Server Setup