E-Mail Properties Setup - Toshiba GD-1040 Service Manual

3. E-mail Properties Setup

This section describes the procedures to set the E-mail properties on how the machine acti-
vates the Internet Fax function.
The following table describes the E-mail properties that can be set up.
Properties Name
Print Text Body
Body Page Limit
Send Disposition
Print Header
Print E-mail Error
Print DSN
Print Disposition
Request DSN
Confirm. Timer
Set Confirm. Time
MSG Size Limit
May 2001 © TOSHIBA TEC
Description
This is to set On or Off for printing the body
section of the received E-mail. However, when
the received E-mail has only the body section, the
body section is printed even if this is set to Off.
This is to set the maximum number of the pages
to be printed when receiving an E-mail. If the
number of the pages to be printed exceeds the
limit, the machine interrupts the printing.
This is to set On or Off for replying to the MDN
request when receiving the documents from other
machines using the Internet Fax function.
This is to set On or Off for printing the header
section of the received E-mail.
This is to set On or Off for printing only the items
that can be printed normally when an error occurs.
The items that machine recognizes to be
erroneous are not printed.
This is to set On or Off for printing the DSN.
This is to set On or Off for printing the MDN
replied from a recipient that informs you the
message successfully received by a recipient.
This is to set On or Off for sending the DSN
request.
This is to set On or Off for printing the alert report
if the machine does not receive the MDN reply
from a recipient in the time interval set in "Set
Confirm. Time."
This is to set the time interval to wait for the MDN
reply before printing the alert report.
This is to set the maximum size for sending
documents using the Internet Fax function. If the
size of documents exceeds the maximum size, the
machine sends the documents separately.
3-11
Default
On
5
OFF
ON
ON
OFF
ON
ON
ON
15MINS
2.0MBYTE
Internet Fax Kit - Function Settings